PHONE 138-2927-5380
Location: Home > Products > Sliding Doors

Aluminium Frame

It is strong, lightweight,beautiful, not rusty,affordable.Door frame and sealing strip slot integrated together helps achieve a better sealing effect. Using extruded aluminium track and nylon pulleys provides excellent working environment,ideal for workshop,industrial places.
  • Product details

Product parameters

Product parameters
一、功能特征
  1.智能性:以用户为本,配置多项智能及保护装置。自动门的控制系统采用内置微电脑芯片,自动设定控制过程。用户选择理想的开闭速度和开放时间,自动门即能持久保持最佳状态,智能程度高。
  2.安全性:设有安全传感装置,消除了夹人的隐患,即使有人推拉门扇,也不会出现程序紊乱状况。独特的电锁功能,可按需要控制进出人员。另可选配备用电源,可在外电源断电时使自动门继续运行并保持在设定状态,确保人员安全。
  3.可靠性:专业机械传动设计,特别配制高效DC无刷直流电机,具有使用寿命长、力矩大、噪音低等特性,配装先进的齿形同步带传动,门体运行更平稳可靠。
二、类型
  1.全玻璃平移
  此类自动平移门导轨大多是采用铝合金型材,
  2.重叠平移自动门
  门体设计采用钢化玻璃,透明度高,结构简洁,豪华气派。美容会所,写字楼等常使用这一类型自动门
  3.有框平移
  导轨为铝合金型材,传动结构合理、可靠、寿命达到100万次以上。
  4.有框平移自动门
  门体设计采用欧洲流行款式,外包不锈钢或铝合金边框,造型精炼,线条流畅,用料精良,可根据需要喷涂多种色彩。内嵌大平面高强度玻璃,整体尊贵大方,富有现代感。
  5.重叠平移
  重叠品议自动门的开启宽幅是标准平移自动门的1.3倍。
  6.全玻璃自动平移门
  适用于人流量大、需搬运超宽物体的通道口,
  如汽车展厅、展览馆、会议中心等场所。门体可采用不锈钢边框,也可采用铝型材门框或高强度的钢化玻璃。
  7.工厂平移
  导轨为铝合金型材,传动结构合理、可靠、寿命达100万次以上。
  门体设计采用彩钢板发泡工艺或大平面亚光不锈钢板材或铝板,隔音性能好。活动门运行平稳。也可用手控开关操作。
  适用于工厂、仓库等场所。
三、工作原理
  【工作流程】:
  感应探测器探测到有人进入时,将脉冲信号传给主控器,主控器判断后通知马达运行,同时监控马达转数,以便通知马达在一定时候加力和进入慢行运行。马达得到一定运行电流后做正向运行,将动力传给同步带,再由同步带将动力传给吊具系统使门扇开启;门扇开启后由控制器作出判断,如需关门,通知马达作反向运动,关闭门扇。
  【工作方式】:通过平移门电机齿轮转动带动与门体连接的齿条,实现门体在预埋的轨道上左右滑动,选用遥控器为单键操作模式,命令为"开-停-关-停"的循环命令。
四、主要部件
  首先,自动平移门机组由以下部件组成:
  (1)主控制器:它是自动门的指挥中心,通过内部编有指令程序的大规模集成块,发出相应指令,指挥马达或电锁类系统工作;同时人们通过主控器调节门扇开启速度、开启幅度等参数。
  (2)感应探测器:负责采集外部信号,如同人们的眼睛,当有移动的物体进入它的工作范围时,它就给主控制器一个脉冲信号;
  (3)动力马达:提供开门与关门的主动力,控制门扇加速与减速运行。
  (4)门扇行进轨道:就象火车的铁轨,约束门扇的吊具走轮系统,使其按特定方向行进。
  (5) Door leaf spreader walking wheel system: used to hang movable door leaf, and at the same time drive the door leaf to run under power traction.
  (6) Synchronous belt (some manufacturers use triangle belt): used to transmit the power produced by the motor and traction door fan spreader walking wheel system.
  (7) Lower guide system: It is a guide and positioning device for the lower part of the door leaf to prevent the front and back swing of the door body during operation.
Auxiliary configuration
  Sensor selection: In high-end hotels and office buildings, high-sensitivity sensors can be selected; in banks, shops and other places where people often pass by, choose narrow-area sensors.
 
Function:
  Intelligent operating system microcomputer control
  automatic door controller adopts high-tech microcomputer CPU control, door speed can be set at will, slow brake strength, delayed door opening time, digital display status, speed, time, key setting and fine adjustment , Without tools, simple operation, you can change the set value at any time, easy to install.
  DC brushless motor: DC brushless motor is a high-tech product that combines electronics and motors. It has the characteristics of high efficiency, power saving, low noise, high speed, high torque and no heat generation during continuous use. It has good performance and flexible speed control. , With humanity.
  Ultra-quiet operation: Due to the use of DC brushless motor drive and T-shaped rack timing belt, the operation of the body from low speed to high speed is beyond tranquility.
  Safe operation: automatic reversal safety device When the door leaf is in the closed state, the door leaf can be automatically reversed at high speed when the door is in the process of encountering people or obstacles, etc., and the door is opened immediately to prevent the occurrence of pinch events and damage to the machine, and improve personnel access The safety and extend the life of automatic doors.
  Safe stop: When the automatic door is opened or closed, if the resistance cannot advance, the door leaf automatically reverses at a high speed, and advances at a safe speed the next time it approaches the resistance area. If the resistance cannot be passed three times in a row, the automatic door will stop Run the action until the signal is triggered again.